Factory selling Dc 12v Crane Remote Control - Reducer used for GJJ passenger hoist 1:16 ratio speed – Jinyang

Short Description:

Product Detail

Quality guarantee

Product Tags

Feedback (2)

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Worm Gearbox , Hoist Elevator Reducer Use Worm Gear , Scissor Lift , We've been prepared to cooperate with company friends from at your home and overseas and produce a wonderful future with each other.

Factory selling Dc 12v Crane Remote Control - Reducer used for GJJ passenger hoist 1:16 ratio speed – Jinyang Detail:

JIAXING JINGYANG CONSTRUCTION MACHINERY CO.,LTD profileJiaxing Jinngyang Construction Machinery Co.,Ltd is a professional factory in construction machinery, equipment, material & spare parts. Dedicated to provide a complete solution to mechanical & civil construction with quality products and perfect service Enjoying good reputation of business by respecting & satisfying our customers. Looking back to the past, we have made one brilliant achievement after another with our efforts and your support. Looking forward to the future, we are determined to be with you as always on the way to greater success and win-win results.We have following Tower crane, passenger hoist, suspended platform,electric winch, electric hoist, gear rack and pinion, worm and shaft, electric units, scaffolding and etc. In addition to the good quality of our products, we also have our profrssional technical service provide the clients with our best after-service. We have supplied more than 80 units of passenger hoist, 140 units of suspended cradle to the market since 2007.

GJJ passenger hoist reducer
Passenger hoist reducer application for the GJJ hoistRatio speed 1:16Brand:jingyang

ProfileCWtype reducer main research and design for the passenger hoist transmission use device.Whorm wheel we take superior alloy steel, hard teeth surface, finial finish, whorm wheel take superior tin br onze, body take high strength alluminium，we adopt r eliable design and special treatment, excellent mecha nical performance and more bigger load capacity, hig her transmission effiency, small noise, stable working ensure safety.

model	Ratio speed	Speed m	Rated power Pi	Out put t2	trasmission	Weight
model	I	r/min	KW	N • m	%	kg
CW125-10-IF	10	1500	14.9	890	91.5	60
CW125-12-IF	12	1500	11.8	840	91.5	60
CW125-14-IF	14	1500	11.6	920	90	60
CW125-16-IF	16	1500	11.6	1000	88	60
CW125-20-IF	20	1500	9	1010	88	60

Technical parameterSpecifications Manual1.Outline

Circular arc & cylindrical worm reducer has three characteristics. First, bearing big capacity; Second, high efficient transmission; Third, compact and reasonable structure. The suitable working surrounding is -40 ℃ ~ +40 ℃. The input rotational speed is not more than 1,500 Rpm.

2.Installation and maintenance

Reduction gear should reliably install on the stable foundation, and it should be convenient to refuel and drain oil and also the air is smooth.

After the reduction gear installment, operation by hand should be flexible without obstruct. Before the normal operation of reduction gear, it must be carrying on the idling revolution. When reduction gear doesn’t have any breakdown, please start following several stages to load: in the first stage, carrying on 25% of the rating load; in the second stage, carrying on 50%; in the third stage, carrying on 100%.

Each rolling stage takes oil temperature balance as a standard, which is not less than 2 hours, and the maximum oil temperature can’t surpass 100 ℃. Reduction gear revolution is steady without impact vibration and noise and it should be lubricating very well, and anywhere can’t leak the oil.

3.The lubrication of reduction gear

Owing to this structure, reduction gear makes use of oiled lubrication. (Recommendation: worm-gear oil N320 and ambient temperature： 0 ℃ ~45 ℃). When reduction gear uses in the first time, the lubrication should be replaced after 200 hours, and later it should be replaced every 4,500 working-hours.

4.Attention

The user can’t disassemble spare parts of reduction gear to overhaul. If machine is working exceptionally, please promptly contact with the factory.

Jiaxing Jingyang construction machinery CO., LTD

Item	Part No.	English name	Item	Part No.	English name
1	DL-0	Cage	31	WG-19	Worm gear fan
2	WG-0	Reducing device	32	MAC-8	Rubber
3	MAC-010	Motor	33	WG-5	Woem wheel
4	ZJ-0	Mast section	34	WG-15	Worm
5	XS-00	Safety device	35	MAC-9	Couping
6	HY	Hydraulic spring	36	MAC-020	Pinion
7	TIE	Tie-in	37	ZJ100-10	Rack
8	TL-2	Safety device spanner	38	XK	Drop test operate box
9	PJ	Pipe joint	39	CT	Out operate box
10	BL100-G	Roller	40	FR	Resistance
11	BH-10	Cable joint	41	PS	Waterproof plug
12	ML100-9	Gate roller lower	42	SE	3-phase swotch
13	ML100-10	Gate roller upper	43	TC	Transfprmer
14	WM130-40	Rope pulley	44	SDD	Annunciator
15	BS-10	“J ” type screw	45	PLC	PLC Module
16	BQ-10	Cable joint	46	QF	Creepage switch
17	BM-24	Screw	47	SL	Limit switch
18	TL-1	Roller spanner	48	FM	Belling
19	RA-9	Adjustment unit	49	JS	Jacket
20	RA-12	Brake pad	50	FS	Fan
21	SP	Spring	51	SY	EL lock
22	DL-110	Rubber pad	52	F	Drop test plug
23	WG-03	Brearing	53	KCE	Thermal relay
24	WG-030	Oil seal	54	SQ	Braker
25	DXI-5	Nylon wheel	55	KMB	Contactor
26	RA-13	Rotary disk	56	BR	Brake unit
27	RA-120	Brake piece	57	SPL	Speed relay
28	RA-10	Brake disc	58	EL	Lamp
29	RA-7	Electromagnet	59	CS	Calling system
30	CAM-3	Counter roller	60	OL	Overload

RFQQ: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-7 days if the goods are in stock. or it is 15-20 days if the goods are not in
stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance
before shippment.If you have another question, pls feel free to contact us as below:

Contact us
Skype:mickey1987888
Tel: +86 0573-84187637
Fax:+86 0573-841876376
Whatsapp& Mobile:+0086 18267343860Add: No.1111,xiehe park, nanhu district, jiaxing of Zhejiang province, China. Close to Shanghai (Post code: 314000)Email:mickey@jingyangmachinery.com

Web:www.jingyanghoist.com / www.jingyangmachinery.com / www.jingyangroup.com

Jiaxing Jingyang Construction Machinery Co.,Ltd.

Product detail pictures:

We constantly think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body along with the living for Factory selling Dc 12v Crane Remote Control - Reducer used for GJJ passenger hoist 1:16 ratio speed – Jinyang, The product will supply to all over the world, such as: Romania , European , Thailand , Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .

We guaranee our product all origional GJJ high quality item, no fake item supply.

Elevator Cage Parts Rollers Supplier Best-Selling

Gearbox Output Shaft With High Precision Factory OEM/ODM Product

Gjj Counter Roller Manufacturer Cheap Price Sale

Passenger Hoist Output Shaft Products Made in China

Solar Energy Light Factory OEM/ODM Product

Worm Gear Worm Wheel And Shaft Manufacturer Cheap Price Sale

It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.

By Evelyn from Karachi - 2015.12.28 15:18

The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.

By Novia from Botswana - 2015.12.11 11:26